Disposable Infusion Set with Burette

1.Keep all caps open and the IV bottle in an upright position. Insert the puncture spike fully through the rubber stopper of the infusion bottle.
2.If needed, inject medication directly into the infusion bottle before starting the procedure.
3.Close clamp A, then hang the infusion bottle at a proper height.
4.Open clamp A to let the required volume of liquid enter the burette chamber, then close clamp A again.
5.Make sure the appropriate venous needle is securely connected. Gently squeeze the drip chamber until it is half-filled; do not fill it completely.
6.Open clamp A to adjust the fluid level in the burette. If adding medicine through the top injection port, close clamp A first.
7.Proceed with venipuncture. Slowly open clamp B to regulate the fluid flow.
8.Observe the dripping speed and adjust to the required rate. The Disposable Infusion Set With Burette is calibrated at about 60 drops/mL

The Disposable Infusion Set With Burette is non-toxic and non-pyrogenic for safe clinical use.Avoid storing under extreme temperatures or high humidity.
Equipped with a large, clearly scaled burette chamber
Calibrated at approximately 60 drops/mL
Sterile and pyrogen-free
Designed with a roller-type flow regulator for smooth and accurate control